|
Question 1.
Which network should be sized to accommodate backup data in an NDMP environment?
A. Public LAN
B. SAN
C. Private LAN
D. WAN
Answer: B
Question 2.
Your customer has accidentally removed a Client File Index(CFI).
Which NetWorker command can you use to recover the CFI?
A. nsrd
B. nsrck
C. recover
D. mminfo
Answer: B
Question 3.
When configuring a remote tape library in NetWorker, what must you do before running jbconfig?
A. Verify the user running jbconfig is in the Administrator list
B. Configure a storage node resource for the remote storage node
C. Perform an inventory of the volumes in the tape library
D. Run inquire to create the device path names
Answer: A
Question 4.
The customer has a DL710 system, and wants to use the Auto Archive feature. The physical tape library has been connected to the disk library engine.
What is the next step?
A. Perform a Rescan on the back-end ports
B. Run the Physical Library Wizard
C. Create a new SAN Client for the physical library
D. Run the Configuration Wizard
Answer: A
Question 5.
If a NetWorker client is backed up at an incremental level, at which level is its Client File Index (CFI) backed up?
A. 1
B. Incremental
C. 9
D. Full
Answer: C
Question 6.
You are setting up EMC Replication Storage group on a CLARiiON array for the RM use.
What should be attached to this storage group?
A. RM Server
B. Source LUNs
C. RM Mount Host
D. Clone LUNs
Answer: D
Question 7.
What happens when a NetWorker advanced file type device fills up?
A. Specified save sets on the volume are immediately staged
B. An email is sent to the NetWorker administrator recommending that another volume be
mounted
C. Save streams going to the device hang until another volume becomes available
D. A NetWorker notification is performed
Answer: D
Question 8.
What is the major difference between a CLARiiON backup-to-disk and a CLARiiON Disk Library?
A. ATA disk
B. Scalable
C. Number of service processors
D. Disk-to-Disk replication
Answer: D
Question 9.
You have restored your customer's Replication Manager Solid database but the database remains corrupted.
Which action should you take?
A. Rerun the restore script with the "/logdelete" switch
B. Restore the backup from tape and rerun the restore script with the "/logdelete" switch
C. Restore the backup from tape and rerun the restore script with the "/nologs" switch
D. Rerun the restore script with the "/nologs" switch
Answer: C
Question 10.
Which command do you use to change the browse and the retention times of a save set?
A. nsrmm
B. nsrls
C. nsrjb
D. mminfo
Answer: A
Question 11.
Which backup strategy is used to backup data to an offsite location?
A. SnapView
B. Vault Backup
C. Remote Backup
D. Remote Copy
Answer: C
Question 12.
Which tool is used to align the data to track boundaries on a LUN presented to Windows 2003 Enterprise Server?
A. Disk Management
B. Diskpart
C. Navisphere
D. Diskpar
Answer: D
Question 13.
The customer asks you to make a clone of a save set in NetWorker. There is one appendable clone volume available. However, the clone operation does not use this volume and is asking for a new volume to be mounted.
What may be the cause?
A. Source volume is being used for another clone operation
B. Clone volume has an earlier clone of the save set
C. Source volume has an earlier clone of the save set
D. Entire cloned save set must fit on the clone volume and there is not enough room
Answer: B
Question 14.
Your customer wants to automatically create a copy of critical save sets using NetWorker.
How do you implement this?
A. Configure client to run two simultaneous backups
B. Execute the nsrclone command
C. Enable cloning on the group resource
D. Configure automatic staging of save sets from disk to tape
Answer: C
Question 15.
The table shows a possible combination for creating virtual tapes when using CLARiiON Disk Library.
When would this combination be used?
Exhibit:
A. User wants to specify the LUN(s) on which to create virtual tapes and the DL has an attached
physical tape library
B. User does NOT want to specify the LUN(s) on which to create virtual tapes and the DL does
NOT have an attached physical tape library
C. User wants to specify the LUN(s) on which to create virtual tapes and the DL does NOT have
an attached physical tape library
D. User does NOT want to specify the LUN(s) on which to create virtual tapes and the DL has an
attached physical tape library
Answer: C
|
Question 1.
Which of the following is NOT a typical function of an Intrusion Detection System?
A. Monitors segment traffic to detect suspicious activity
B. Monitors network traffic and corrects attacks
C. Monitors traffic patterns to report on malicious events
D. Monitors individual hosts (HIDS) or network segments (NIDS)
Answer: B
Question 2.
Which best describes a SYN Flood attack?
A. Attacker redirects unusually large number of SYN/ACK packets
B. Attacker sends relatively large number of altered SYN packets
C. Attacker floods a host with a relatively large number of unaltered SYN packets
D. Attacker floods a host with an unusually large number of legitimate ACK packets
Answer: B
Question 3.
Which best describes a type of attack that aims to prevent the use of a service or host?
A. Reconnaissance
B. Denial of Service
C. IP Spoofing
D. Exploit
Answer: B
Question 4.
Which of the following is NOT a valid detection method used by Dragon Network Sensor?
A. Signature detection
B. Protocol detection
C. Policy detection
D. Anomaly detection
Answer: C
Question 5.
Which of the following is NOT a function of Dragon Forensics Console?
A. Allows for central configuration of Active Response mechanisms to deter network attacks
B. Centrally analyzes activity as it is occurring or has occurred over time
C. Correlates events together across Network Sensor, Host Sensor, and any other infrastructure
system (e.g., firewall, router) for which messages have been received (via Host Sensor log
forwarding)
D. Provides the tools for performing a forensics level analysis and reconstructing an attackers
session
Answer: A
Question 6.
Which of the following does NOT describe Dragon Host Sensors Multi-Detection methods?
A. Monitors output to a hosts system and audit logs
B. Monitors a hosts files via MD5 integrity-checking
C. Monitors a hosts specified network interlace promiscuously for anomalous activity
D. Monitors a hosts specific file attributes for changes to owner, group, permissions and file size
E. Monitors a Windows hosts Registry for attributes that should not be accessed and/or modified
Answer: C
Question 7.
What is the method that Dragon uses to secure the communication between the remote management host and Dragon Policy Manager?
A. SSH
B. SSL
C. IPSec
D. MD5
Answer: B
Question 8.
What is the primary and default source of event data tor Dragon RealTime Console?
A. dragon.log.xxxx
B. dragon.db
C. Ring Buffer
D. Dragon Workbench
Answer: C
Question 9.
For what purpose can Dragon Workbench be used?
A. Read data from TCPDUMP trace/capture file and write to dragon .db for later analysis
B. Read data from dragon.db file and write to a TCPDUMP trace/capture file for later analysis
C. Read data from RealTime Console and write to a TCPDUMP trace/capture file for later
analysis
D. This functionality is ONLY available on Dragon Appliances
Answer: A
Question 10.
What is one benefit of Dragon Network Sensors dual network interface capability as deployed on a non-Dragon Appliance system?
A. Secure management and reporting on one interface; Network Sensor invisible on other
interface
B. Allows for collection of event data from both interfaces simultaneously
C. Allows for protocol detection from one interface, and anomaly detection from the other
interface
D. This functionality is ONLY available on Dragon Appliances
Answer: A
Copyright © 2004 CertsBraindumps.com Inc. All rights reserved.